DigitaLinx DL-HD70 Quick Install Manual - Page 2
Browse online or download pdf Quick Install Manual for Extender DigitaLinx DL-HD70. DigitaLinx DL-HD70 8 pages.
Also for DigitaLinx DL-HD70: Installation Manual (2 pages)
Print Page
The DigitaLinx DL-HD70 HDBaseT extender set transmits HDMI (1080p, 4K and 3D)
including HDCP 2.2, bidirectional IR, and RS232 up to 70 meters away using a single
Category 6 twisted pair cable.
Built-in surge protection and diagnostic LEDs ensure hassle-free and robust
installations. Flexible power design allows the units to be powered at either the
TX or RX end, and only one power supply is required. The 18 volt power supply is
secured with a screw-on connector to prevent the power from being accidentally
disconnected.
The DL-HD70 is sold only as a set. The individual transmitter and receiver are not
compatible with other HDBaseT devices due to proprietary PoE circuitry.
• DL-HD70 Transmitter and Receiver Set
• (1) Quick Install Guide
• (2) IR Receivers (Eye)
• (2) IR Transmitters (Emitter)
• (1) IR-AC IR Coupler Cable
• (2) 3 pole Terminal Block (attached to extenders)
• (1) DC18v Power Supply with 4 Power Plug Adapters for US, EU, AU, UK
• (4) Mounting Brackets with screws