DigitaLinx DL-AS21C Installation Manual - Page 3
Browse online or download pdf Installation Manual for Switch DigitaLinx DL-AS21C. DigitaLinx DL-AS21C 9 pages.
Print Page1. Verify all components included with the product are present before
installation.
2. Turn off power and disconnect the audio/video equipment by
following the manufacturer's instructions.
3. Connect an HDMI cable between the digital source and an available
input on the DL-AS21C.
4. Connect a VGA cable between the analog source and the VGA input.
5. Connect an audio cable with 3.5 mm end between the analog source
and the analog audio input. Audio will not pass without a video
signal present.
6. Connect an HDMI cable between the display and the HDMI output.
7. Connect the appropriate audio output cable to any of the available
audio output ports of the DL-AS21C.
8. Connect an RS232 cable between a control device and the RS232
port.
9. Connect switches and LEDs to the Source and CEC contact closure
connections.
10. Connect the included power supply to the DL-AS21C and lock the
power supply to the power connector by twisting the locking collar
clockwise.
11. Power on all audio/video devices.
Installation Instructions
Contact Closure Wiring
HDMI LED +
VGA LED +
Ground for all connections
HDMI contact closure
VGA contact closure
Ground for all connections
CEC O
CEC On
LED connections will indicate selected
source input.
Contact closure connections will manually
switch source input.
CEC connections allows remote access to
manually turn on and off a CEC enabled
display.