Cisco Aironet 1815i Getting Started Manual - Page 18

Browse online or download pdf Getting Started Manual for Wireless Access Point Cisco Aironet 1815i. Cisco Aironet 1815i 44 pages.

Print Page

Mounting and Grounding the Access Point

Cisco Aironet 1815i series access points can be mounted in several configurations – on a suspended

ceiling, on a hard ceiling or wall, or in the plenum air space above a suspended ceiling. You can mount

the AP on an electrical or network box.

When mounting the AP in the plenum air space or above a suspended ceiling, it should be

Note

mounted on a vertical wall or with the face of the AP (having the status LED) directed

downwards.

The standard mounting hardware supported by the AP is listed in

Table 1

Bracket and Clips for Mounting the AP

Part Number

Bracket

AIR-AP-BRACKET-8

Clips

AIR-AP-T-RAIL-R

AIR-AP-T-RAIL-F

AIR-CHNL-ADAPTER

Detailed instructions on how to mount the access point is available at the following URL:

http://www.cisco.com/c/en/us/td/docs/wireless/access_point/mounting/guide/apmount.html

The AP can be powered using only through Power-over-Ethernet (PoE), from:

• A network device supplying PoE power of 802.3af Class 0 or greater.

• Cisco power injectors AIR-PWRINJ5 or AIR-PWRINJ6.

Description

Mounting bracket for ceiling and wall. See

Ceiling Grid Clip (Recessed mounting)

(This is the default option)

Ceiling Grid Clip (Flush mounting)

Optional adapter for channel-rail ceiling grid profile.

Table

Figure