Cabela's Alaskan Guide Model Gear Manual - Page 6

Browse online or download pdf Gear Manual for Tent Cabela's Alaskan Guide Model. Cabela's Alaskan Guide Model 6 pages.

Print Page

CABELA'S TENTS ARE EASY TO ASSEMBLE AS LONG AS YOU READ THE INSTRUCTIONS CAREFULLY AND AVOID EXCESSIVE

FORCE TO ANY PART OF THE TENT OR POLES.

ST E P 4 - SE CU RIN G POLES

Pole D follows the seamline from points C1 to C2. Insert one

of the ends onto the ring pins and bend over the top of

existing poles. Next, insert the opposite end into corre-

sponding ring pin. Repeat the process for pole-assemblies E

and F. Pole E follows points B1 to B2. Pole F follows points

A1 to A2 (Fig. 5). Attach C-clips to the rest of the pole

assemblies.

(Note: Where poles intersect, there is a hook-and-loop

webbing attachment. Pass webbing over intersecting poles

and through the D-ring and then back onto itself. (Fig. 6))

ST E P 5 - SE TT ING VESTIBU LE

Position rain fly so that the zipper portions are over the two

tent windows and the extended (gray) roof portion is over

the front tent door. Insert the shorter rain-fly pole assembly

into the rain-fly pole sleeve at the rear of the vestibule until

it extends out the opposite end.

Connect the rain-fly corners to the tent by attaching the

shock-corded hooks to the tent corners' black steel rings.

Insert pole ends onto the remaining ring pins at points A1

and B1 (Fig. 5) and attach remaining rain-fly hooks.

ST E P 6 - F INAL STE PS

Guy out the front vestibule by pulling the front of the

vestibule away from the tent evenly until it is taut. Stake

out at each webbing loop on either side of the vestibule.

Stake out all remaining loops and guy lines.

(Note: Guy lines will not only stabilize the tent in windy

conditions, they also ensure that the tent vents properly.)

PLEASE READ THIS MANUAL IN ITS ENTIRETY PRIOR TO USING THIS PRODUCT. CALL 1-800-237-4444 FOR ASSISTANCE OR VISIT WWW.CABELAS.COM

A SSE MB LY CONT.