argenta APE 800a Operation And Maintenance Manual - Page 13

Browse online or download pdf Operation And Maintenance Manual for Furnace argenta APE 800a. argenta APE 800a 16 pages. Burn-out furnaces

Print Page
Burn-out furnace APE800 and APE800a

8.4. Launching the programme with a delay

In order to start the programme with a time delay one should follow the
undermentioned instruction.
sign
description
Turn on the power supply with the knob at the front of the temperature driver and wait
0
a moment till the box below appears.
1
This screen shows the current temperature in the furnace chamber. The temperature
must not be higher than 150
With the keys
following key:
While the delay function is in operation this state is indicated with the flashing sign S1
or S2. After this time the driver starts completing the default programme.

8.5. Stopping the current programme

In order to stop the current programme one should follow the undermentioned
procedure.
sign
description
While the programme is in operation press the following key:
Press the
The current programme will be stopped, the program selector will return to the main
box and it will show the current temperature in the furnace chamber.
WARNING: Another launching will be possible only after the temperature is lower than
150
to delay the start of programme no. 1 press and hold the following key
to delay the start of programme no. 2 press and hold the following key
and
set the delay time counting in hours and confirm it with the
.
key till the sign
o
C.
o
C.
*the analogous situation concerns programme no. 2
*the analogous situation concerns programme no. 2
*the analogous situation concerns programme no. 2
appears, then press the following key:
2008-06-18
.
13