Cabela's Adventure 5500 Owner's Manual - Page 10

Browse online or download pdf Owner's Manual for Metal Detector Cabela's Adventure 5500. Cabela's Adventure 5500 10 pages. Professional metal detector
Also for Cabela's Adventure 5500: Owner's Manual (20 pages), Owner's Manual (20 pages)

Print Page
Cabela's Adventure 5500 Owner's Manual
Basic Operation
DEFAULT OPERATION
The detector defaults to ALL METAL Mode after powering on. In this mode, all types of
metals will be detected. An object's probable identification is indicated by illuminating the icons
beneath the appropriate category. In addition, the probable depth of coin-sized objects is indicated
by the number of icons illuminated under each Target-ID. 3 icons illuminated indicates a deep
object. 1 icon illuminated indicates a shallow object. All detected objects will cause at least one
icon to illuminate. The greater the distance an object is from the searchcoil, the greater its depth
reading.

DISCRIMINATION

Discrimination is used to eliminate unwanted objects from detection.
To eliminate categories of objects from detection, press DISCRIMINATION
After pressing DISCRIMINATION
, the detector will:
• Beep
• Display an "X" over the left-most segment, iron
Metals containing Iron will not be detected.
10
- cont.
.
Basic Operation
To increase the level of discrimination, press DISCRIMINATION
depressed, an additional "X" will appear, thus eliminating from detection the objects which fall
into the corresponding categories.
To decrease the level of discrimination, press DISCRIMINATION
depressed, an illuminated "X" will disappear, thus returning to detection the objects which fall
into the corresponding categories.
Discrimination is a fixed-start-point elimination system. Objects are cumulatively eliminated as
the level of discrimination increases.
NOTCH
To selectively eliminate a category from detection within the metallic spectrum, use the NOTCH
feature.
Technical Note:
The NOTCH touch pad causes the status of an "X" segment to toggle between
ON and OFF.
To use the NOTCH feature:
The NOTCH touch pad can be depressed at any time.
A first demonstration is best accomplished as follows:
1) Turn the power OFF.
2) Turn the power ON.
3) Press
.
A flashing "X" will appear over the IRON segment.
4) Press DISCRIMINATION
Notice that the "X" moves upon each press of DISCRIMINATION
5) Press
again.
The flashing "X" will become permanently illuminated.
If an object has been "notched-out", you can return it to detection status.
To "un-notch" a category:
1) Press
.
2) Move the flashing "X" over the permanently illuminated "X".
3) Press
again.
- cont.
. Each time the
. Each time
several times
.
pad is
is
11