ACU-RITE 00899 Instruction Manual - Page 8

Browse online or download pdf Instruction Manual for Weather Station ACU-RITE 00899. ACU-RITE 00899 16 pages. Rain gauge
Also for ACU-RITE 00899: Instruction Manual (16 pages)

Print Page

Rain Gauge Installation

• To ensure accurate rain measurement, the rain gauge MUST be

placed on a flat, level surface.

• Ensure the rain gauge is not placed in a low spot that could become

flooded or in an area where there are obstructions above it.

1. Separate the rain gauge cover from the rain gauge base.

2. Locate the two holes on the rain gauge base.

3. Fasten the rain gauge base to a sturdy surface, like a deck railing or a fence

post, with screws (included) using hand tools. (Power tools may slip during

installation, causing damage to the rain gauge.)

Setup is Complete

The rain gauge will now synchronize with the display. It may take a few minutes

for synchronization to complete. Please refer to the troubleshooting section of this

manual if anything appears to be functioning improperly.

SQUEEZE

SQUEEZE TABS TO OPEN

INSTALL 2 SCREWS USING

HAND TOOLS ONLY.

THEN RE-ATTACH UPPER CASING