Epson 3880 - Stylus Pro Color Inkjet Printer Start Here Manual - Page 2

Browse online or download pdf Start Here Manual for All in One Printer Epson 3880 - Stylus Pro Color Inkjet Printer. Epson 3880 - Stylus Pro Color Inkjet Printer 6 pages. Printer
Also for Epson 3880 - Stylus Pro Color Inkjet Printer: Brochure (3 pages), Specifications (2 pages), Network Manual (39 pages), Brochure & Specs (8 pages), Start Here (2 pages), Limited Warranty (12 pages), Color Management Manual (47 pages), Brochure & Specs (8 pages), Network Manual (38 pages), Quick Start Manual (2 pages)

Print Page

Turn On the Printer

Connect the power cable. (Do not connect the printer cable yet.)

Press the

Power button.

After a minute, the ink cover is

automatically released.

Lift the ink cover.

If the ink cover is locked, press the

Note:

cover open button on the control panel to release it.

Unpack the 9 ink cartridges and shake each one gently.

Install each cartridge in the correct slot for its color. The arrow mark should be on top and

pointing into the printer.

Do not touch the green chip on top of the cartridge.

Caution:

Arrow

After you install all 9 ink cartridges, close the cover.

The printer starts charging the ink. This takes 7 or 8 minutes. The LCD displays READY

when charging is complete.

Do not turn off or unplug the printer while the power light is flashing and you see the

Caution:

message CHARGING INK on the LCD. Also, do not lift the ink cover or load paper during the process.

The first time you install ink cartridges, the printer uses some ink to charge the printing system,

Note:

so print yields may be lower with the first cartridges. Subsequent ink cartridges will last for their full

rated life.

Ink cover

Ink

Push each cartridge

in until it clicks.