Cisco ASA 5506-X Software Manual - Page 15

Browse online or download pdf Software Manual for Wireless Access Point Cisco ASA 5506-X. Cisco ASA 5506-X 37 pages. Threat defense reimage guide
Also for Cisco ASA 5506-X: Quick Start Manual (10 pages), Quick Start Manual (14 pages), Easy Setup Manual (11 pages), Mount And Connect (12 pages), Installation Manual (46 pages), Mount The Chassis (10 pages), Hardware Installation Manual (26 pages)

Print Page

Cisco ASA and Firepower Threat Defense Reimage Guide

sync

tftpdnld

The ASA image downloads and boots up to the CLI.

See the following information:

• interface—(ASA 5512-X, 5515-X, 5525-X, 5545-X, and 5555-X only) Specifies the interface ID. Other

models always use the Management 1/1 interface.

• set—Shows the network settings. You can also use the ping command to verify connectivity to the server.

• sync—Saves the network settings.

• tftpdnld—Loads the boot image..

Example:

Example for the ASA 5555-X:

rommon 2 > interface gigabitethernet0/0

rommon 3 > address 10.86.118.4

rommon 4 > netmask 255.255.255.0

rommon 5 > server 10.86.118.21

rommon 6 > gateway 10.86.118.1

rommon 7 > file asalatest-smp-k8.bin

rommon 8 > set

ROMMON Variable Settings:

ADDRESS=10.86.118.3

NETMASK=255.255.255.0

SERVER=10.86.118.21

GATEWAY=10.86.118.21

PORT=GigabitEthernet0/0

VLAN=untagged

IMAGE=asalatest-smp-k8.bin

CONFIG=

LINKTIMEOUT=20

PKTTIMEOUT=4

RETRY=20

rommon 9 > sync

Updating NVRAM Parameters...

rommon 10 > tftpdnld

Example for the ASA 5506-X:

rommon 2 > address 10.86.118.4

rommon 3 > netmask 255.255.255.0

rommon 4 > server 10.86.118.21

rommon 5 > gateway 10.86.118.21

rommon 6 > file asalatest-lfbff-k8.SPA

rommon 7 > set