Cisco ASA 5506H-X Mount The Chassis - Page 5

Browse online or download pdf Mount The Chassis for Wireless Access Point Cisco ASA 5506H-X. Cisco ASA 5506H-X 10 pages. Threat defense reimage guide
Also for Cisco ASA 5506H-X: Quick Start Manual (10 pages), Quick Start Manual (14 pages), Easy Setup Manual (11 pages), Software Manual (37 pages), Installation Manual (46 pages)

Print Page

Mount the Chassis

Figure 3: Install the Rack Shelf on the Chassis

Three short black screws M3 x 6 mm (part number

48-0384-01)

Step 4

Adjust the position of the chassis and the rack shelf until the three mounting holes in the dimples in the bottom of the

shelf are aligned with the mounting holes in the bottom of the chassis.

Step 5

Tighten the screws to lock the chassis into place on the rack shelf.

Caution

Make sure you are using the short black screws (M3 x 6 mm), otherwise you will damage the chassis.

Step 6

Carefully turn the rack shelf right-side up.

Step 7

Install the power supply on the rack shelf behind the chassis.

Rack-Mount the Chassis

Mount the Chassis