Caberg Just SpeakS User Manual - Page 5

Browse online or download pdf User Manual for Motorcycle Accessories Caberg Just SpeakS. Caberg Just SpeakS 14 pages. Bluetooth headset & intercom for scooters and motorcycles

Print Page
Caberg Just SpeakS User Manual
JUST SPEAK S
Low Battery Warning
When the battery is low, the blinking blue LED in stand-by mode turns to
red and you will hear mid-tone triple beeps and a voice prompt saying "Low
battery".

Adjusting the Volume Level

You can easily adjust the volume by pressing the (+) Button or the (-) Button.
You will hear a beep when the volume reaches maximum or minimum level.
The volume is set and maintained independently at different levels for each
audio source even when you turn off and on the headset. For example,
once you set the volume for mobile phone handsfree, it will not change even
if you adjust the volume when you hear Bluetooth MP3 music. So you can
always maintain the preferred optimum volume level for each audio source.
8

Function Priority

The Just Speak S operates in the following order of priority:
(Highest)
Mobile Phone
Intercom
(Lowest)
Bluetooth Stereo Music
A lower priority function is always interrupted by a higher priority function.
For example, stereo music is interrupted by an intercom call, and intercom
conversation is interrupted by an incoming mobile phone call.

Fault Reset

When the Just Speak S is not working properly or is in faulty status for
any reason, you may reset by pushing the pin-hole reset button on the left
speaker unit. Insert a paper clip into the reset pin-hole and press and hold
the reset button for a second with light pressure. The Just Speak S will be
switched off after which time, you have to turn the system back on and try
again. However, this will not restore the headset to factory default settings.
4.

OPERATION QUICK REFERENCE

4. OPERATION QUICK REFERENCE
Function
Operations
1 sec.
1 sec.
Power
+
On/Off
1 press
1 press
Volume
or
Adjustment
pairing
A
1)
5 sec.
Intercom
Pairing
2)
1 sec.
JUST SPEAK S
Sena SMH3
Operations
Function
5 sec.
1)
Caberg JSS v1.0
Bluetooth
Select Caberg Just Speak S
Sena SMH3
2)
Sena SMH3
Pairing
(Phone, MP3,
GPS)
Caberg JSS v1.0
Caberg JSS v1.0
3)
Enter
PIN
1 sec.
Start & End
B
Intercom
5 sec.
Conversation
10 sec.
Configuration
9