Cisco Linksys WET610N Configuring

Browse online or download pdf Configuring for Wireless Access Point Cisco Linksys WET610N. Cisco Linksys WET610N 3 pages. 802.11ac
Also for Cisco Linksys WET610N: Quick Installation Manual (12 pages), Quick Installation Manual (49 pages), Quick Installation Manual (20 pages), User Manual (17 pages)

Print Page
Cisco Linksys WET610N Configuring
Configuring the WET610N for use on the
FRC playing field
The WET610N must be configured manually for use on the playing field at an FRC event.
Instructions
1. Set IP address and subnet on PC used to configure radio
a. IP: 169.254.1.100
b. Subnet: 255.255.0.0
1. Power on the WET610N radio.
2. Using a paperclip, hold down the RESET button of the WET610N radio until the power light
begins flashing, then remove the paperclip.
3. Wait for the power light to turn solid blue
2. Connect an RJ45 Ethernet cable between the WET610N and the computer
3. Open a web browser and navigate to
4. Login
a. Username: admin
b. Password: admin
Configuration instructions for WET610N Radio
Figure 1: Linksys WET610N Radio
http://169.254.1.250
Rev0