Cisco Linksys Wireless-G WBP54GV2 User Manual - Page 33

Browse online or download pdf User Manual for Wireless Access Point Cisco Linksys Wireless-G WBP54GV2. Cisco Linksys Wireless-G WBP54GV2 50 pages. Bridge for phone adapters

Print Page

Wireless-G Bridge for Phone Adapters

15. The Upgrade Utility will upgrade the Bridge's firmware. A pop-up screen will appear when the upgrade is

complete. Click the OK button.

IMPORTANT: Do not disconnect the power adapter from the Bridge while the firmware is

being upgraded. Otherwise, damage may occur to the Bridge.

16. Disconnect the Ethernet network cable from the PC.

If the phone adapter or IP phone is in a different room, disconnect the power adapter from the electrical

outlet. Move the power adapter and Bridge to the location of the phone adapter or IP phone.

17. Connect the Ethernet network cable of the Bridge to the phone adapter or IP phone.

18. Connect the power cable of the Bridge to the Power port of the phone adapter or IP phone.

If necessary, plug the power adapter into an electrical outlet.

Appendix C: Upgrading Firmware

Figure C-12: Upgrade

Successful