Cisco Meraki MR36 Installation Manual - Page 11

Browse online or download pdf Installation Manual for Wireless Access Point Cisco Meraki MR36. Cisco Meraki MR36 19 pages.

Print Page

Attach the Mount Cradle

The access point mount cradle can be used to install your access point in a wide range of scenarios: wall or solid ceiling, below a drop ceiling, on various

electrical junction boxes.

The mount cradle contains a variety of hole patterns that are customized for each installation scenario. The mounting template (included inbox with mount

cradle) should be used to drill holes for wall mounts and also to identify the correct hole patterns in the mount cradle that should be used for each type of mount.

The included mount cradle template shows the hole patterns that should be used for each type of mount.

Wall or Solid Ceiling Mount Using Mount Cradle

Using included wall anchors and screws, attach the mount cradle to your mounting wall or ceiling. It is recommended that the AP be mounted to a wall or solid

ceiling using the mount cradle for physical security reasons.

Drop Ceiling Mount using Mount Cradle

To mount your AP on a drop ceiling T-rail, use the included drop ceiling mounting accessory kit. The accessory kit can be used to mount to most 9/16", 15/16" or

1 ½" T-rails. The kit contains:

Drop ceiling mounting clips with set screws

6-32x4 mm screws

6-32x7 mm screws only used for recessed rail mount

2 rubber spacers