Cisco Meraki MR46E Installation Manual - Page 17

Browse online or download pdf Installation Manual for Wireless Access Point Cisco Meraki MR46E. Cisco Meraki MR46E 19 pages.

Print Page

7. Once the Ethernet LED turns solid green or blue, your computer should obtain an IP address from the AP via

DHCP.

Check Static IP Address Configuration

1. If the AP has a static IP address, the green signal LEDs will begin to flash on and off and you will not receive an IP

address via DHCP.

2. Disconnect the Ethernet cable from the AP.

3. Associate to the SSID being broadcasted by the AP. If there are no other APs in the network within range the SSID

may be appended with "-scanning".

4. Go to my.meraki.com in your web browser.

5. The MAC address on the back of the access point should match the physical address value on the my.meraki.com

Overview page.

6. Once you have verified that the MAC address is correct on the overview tab, click the tab Static IP configuration.

7. Enter the username (serial number on the back of the AP) which is case sensitive and must include the dashes.

(There is no password).

8. Make sure your AP is set to obtain a correct DHCP or static IP address configuration from your network.

Reference

https://documentation.meraki.com/MR

If you are still experiencing hardware issues, please contact Cisco Meraki support by logging in to dashboard and using

the Help option near the top of the page, then opening and email case or calling using the contact information on that

page.

Warranty

MR Warranty coverage periods are as follows:

Indoor MR 46E AP

Note: The above table is a general guideline for warranty terms and is not final. Warranty terms are subject to printed

warranty information on the relevant online Meraki data sheets.

If your Cisco Meraki device fails and the problem cannot be resolved by troubleshooting, contact support to address the

issue. Once support determines that the device is in a failed state, they can process an RMA and send out a

replacement device free of charge. In most circumstances, the RMA will include a pre-paid shipping label so the faulty

equipment can be returned.

Lifetime

Applies to MR device and ethernet cables in box

for additional information and troubleshooting tips.