Epson CX4200 - Stylus Color Inkjet Installation Instruction - Page 4
Browse online or download pdf Installation Instruction for All in One Printer Epson CX4200 - Stylus Color Inkjet. Epson CX4200 - Stylus Color Inkjet 7 pages. Continuous ink supply system for xm prefilled version with auto reset chips
Also for Epson CX4200 - Stylus Color Inkjet: Quick Manual (48 pages), Start Here Manual (8 pages), Technical Brief (6 pages), User Manual (18 pages), Update (1 pages)
Print Page
Step 4.
4、
1)Remove old cartridges in the printer (Pic A);
2) Insert the CIS cartridges into the cartridge car (Pic B); Make sure the
cartridges installed well.(Pic.C)
A
Step 5, Fix Supporting Arm:
5、
1) Tear off the sticker(Pic A); Measure 2.6cm from the edge of the printer, Attach
supporting arm on the printer as Picture B show;
2) The right position like Picture C shown
3) Tear off the sticker of small tube clamp;Attach it at the 4cm away from the
edge of the Printer. As picture F shown.
Rip the label
Step 6. Install the tubing.
6、
Put the tube into the Support Arm and Small Tube clamp as the below picture
shown.
Clamp the tube on the support arm
B
Stick the Support arm at 3cm distance
from the left side, and at 4 cm distance
from the upside of the printer
Get other manuals https://www.bkmanuals.com
C
as the position show on
the above picture.
Finish