Cisco WAP371 Quick Start Manual - Page 7

Browse online or download pdf Quick Start Manual for Wireless Access Point Cisco WAP371. Cisco WAP371 38 pages. Reboot and reset to factory default settings
Also for Cisco WAP371: Quick Start Manual (15 pages), Manual (5 pages), Manual (4 pages)

Print Page
Cisco WAP371 Quick Start Manual

Getting Started with the Configuration

6
To configure the wireless access points, follow these steps to access the Wizard and
then the web-based configuration utility from your computer:
Connect the wireless access point to the same network (IP subnet) as your
S
1
TEP
computer. The factory default IP address configuration of the access points is
DHCP. Make sure your DHCP server is running and can be reached.
See
"Incorrect IP Address" on page 9
you do not have a DHCP server.
Locate the IP address of the wireless access point.
S
2
TEP
a.
The wireless access points can be accessed and managed by Cisco Small
Business network tools and services including the Cisco FindIT
Network Discovery Utility that enables you to automatically discover
all supported Cisco Small Business devices in the same local network
segment as your computer. You can get a snapshot view of each device
or launch the product configuration utility to view and configure the
settings. For more information, see www.cisco.com/go/findit.
b.
The wireless access points are Bonjour-enabled and automatically
broadcast their services and listen for services being advertised by other
Bonjour-enabled devices. If you have a Bonjour-enabled browser, such
as Microsoft Internet Explorer with a Bonjour plug-in, or the Apple Mac
Safari browser, you can find the wireless access point on your local
network without knowing its IP address.
You can download the complete Bonjour for Microsoft Internet
Explorer browser from Apple's website by visiting:
http://www.apple.com/bonjour/
c.
Locate the IP address assigned by your DHCP server by accessing your
router or DHCP server. See your DHCP server instructions for more
information.
Launch a web browser, such as Microsoft Internet Explorer or Mozilla
S
3
TEP
Firefox.
In the Address field, enter the default DHCP address and press the Enter key.
S
4
TEP
Enter the default user name of cisco and password of cisco in the User Name
S
5
TEP
and Password fields.
Click Login. The Wireless Access Point Setup Wizard appears.
S
6
TEP
Follow the Setup Wizard instructions to finish the WAP device installation.
S
7
TEP
We strongly recommend that you use the Setup Wizard for the first
installation.The Setup Wizard turns on the Wi-Fi radio, which allows you to
Cisco Small Business WAP371 Series Wireless Access Point
for troubleshooting information, or if
7