Epson CX5200 - Stylus Color Inkjet Software Installation - Page 11

Browse online or download pdf Software Installation for All in One Printer Epson CX5200 - Stylus Color Inkjet. Epson CX5200 - Stylus Color Inkjet 20 pages. Product support bulletin(s)
Also for Epson CX5200 - Stylus Color Inkjet: Specifications (2 pages), User Manual (12 pages), Product Information Sheet (4 pages), Start Here Manual (8 pages), Start Here Manual (9 pages), Manual (11 pages), Update (1 pages), Product Support Bulletin (40 pages), Product Support Bulletin (17 pages), Product Support Bulletin (4 pages), Read This First (2 pages), Product Support Bulletin (18 pages)

Print Page

Epson CX5200 - Stylus Color Inkjet Software Installation

■

Unplug the Stylus CX and refer servicing to qualified service personnel under the

following conditions: if the power cord or plug is damaged; if liquid has entered the

product; if the product has been dropped or the case damaged; if the product does not

operate normally or exhibits a distinct change in performance. Adjust only those

controls that are covered by the operating instructions.

■

Before transporting the Stylus CX, make sure the print head is capped in the far right

position, the ink cartridges are in place, and the scanner is secured by the

transportation lock.

■

This product includes a lamp component that contains mercury. Please consult your

state and local regulations regarding disposal or recycling. Do not put it in the trash.

Ink Cartridge Safety Instructions

■

Leave the ink cartridges installed. Removing the cartridges can dehydrate the print

head and may prevent the EPSON Stylus CX5200 from printing.

■

Keep ink cartridges out of the reach of children and do not drink the ink.

■

Be careful when you handle used ink cartridges; there may be ink remaining around

the ink supply port. If ink gets on your skin, wash it off with soap and water. If it gets

in your eyes, flush them immediately with water.

■

Do not put your hand inside the EPSON Stylus CX5200 or touch the cartridge

during printing.

■

Do not move the print head by hand; otherwise you may damage the EPSON

Stylus CX5200.

■

Install the ink cartridge immediately after you remove it from its package. Leaving the

cartridge unpacked for a long time before use may result in reduced print quality.

■

Do not use an ink cartridge beyond the date printed on the cartridge package. For

best results, use up the ink cartridges within six months of first installing them.

■

Store ink cartridges in a cool, dark place. Store each ink cartridge so that the bottom

of its package faces down.

■

After bringing an ink cartridge inside from a cold storage site, allow it to warm up at

room temperature for at least three hours before using it.

■

Do not remove or tear the label; this can cause leakage.

■

Do not dismantle the ink cartridges or try to refill them. This could result in damage

to the print head.

■

Do not touch the green IC chip on the side of the cartridge. This may affect normal

operation and printing.