Cisco WUMC710 User Manual - Page 12
Browse online or download pdf User Manual for Wireless Access Point Cisco WUMC710. Cisco WUMC710 17 pages. 802.11ac
Also for Cisco WUMC710: User Manual (17 pages), Quick Installation Manual (17 pages)
Print Page
Linksys WUMC710
Key 1
Enter the WEP key of your network.
Tx Key
Key 1 is the transmit key used by the bridge.
Authentication
The default is Auto, which allows either Open system or Shared
key authentication to be used. Select Open to use open system authentication;
the sender and recipient do not use a WEP key for authentication. Select
Shared to use shared key authentication; the sender and recipient use a WEP
key for authentication.
Click Refresh to update the on-screen information.
After you have entered the security settings, click Connect.
Wireless > QoS
Wireless
WMM Support—Wi-Fi Multimedia (WMM) is a wireless Quality of Service feature
that improves quality for audio, video, and voice applications by prioritizing
wireless traffic. To use this feature, your wireless router or access point must
support Wireless WMM. To disable this option, select Disabled. Otherwise,
keep the default, Enabled.
No Acknowledgement—If you want to disable the bridge's Acknowledgement
option so the bridge does not re-send data if an error occurs, select Enabled.
Otherwise, keep the default, Disabled.
Administration > Management
Use this screen to manage specific bridge functions: access to the web-based
utility, backup of the configuration file, and reboot.
Management
Bridge Access
Use a password to protect access to the browser-based utility.
Bridge Password
Enter a new Password for the bridge.
Re-enter to confirm
Enter the Password again to confirm.
Idle Timeout
The login times out after a period of inactivity that you specify.
The range is 60 to 3600 seconds. The default is 600.
Web Access
Access via Wireless
If you are using the bridge in a public domain where you
are giving wireless access to your guests, you can disable wireless access to
the bridge's browser-based utility. You will only be able to access the browser-
based utility via a wired connection if you disable the setting. Keep the default,
Enabled, to allow wireless access to the bridge's browser-based utility, or select
Disabled to block wireless access to the utility.
Backup and Restore
Backup
To back up the bridge's configuration file, click Backup Configurations.
Then follow the on-screen instructions.
Advanced Configuration
11