CabKing 8V1 Instruction Manual - Page 14

Browse online or download pdf Instruction Manual for Lathe CabKing 8V1. CabKing 8V1 20 pages.

Print Page

If you plan to insert your polished cabochon into a jewelry

finding, you will need to put a flat on the backside of your

cabochon. Included with your machine is an 8" diamond

lap to do this. The lap is diamond electroplated with 360#

and pre-bound to an acrylic backing plate with 1/2" arbor

hole. Install the lap by removing the slotted bolt from the

left arbor with a screwdriver, turning clockwise. Place the

lap onto the lip of the arbor, then secure the lap by

replacing the slotted bolt, turning counter-clockwise.

Make sure the slotted bolt is tight and secure. You may

use other types of diamond laps, such as ones with metal

backing plates. The diamond lap must be used with

water. Just like the canvas polishing pad, aim the black

side spray tube to the center of the disc and adjust the

water drip to your preference by moving the side spray

tube and white nozzle to the left or right (FIG. M).

Important note: The canvas polishing pad is to be used

on the right shaft. The diamond lap is to be used on the

left shaft.

The art of cabbing involves experimentation, since every stone is different. As you

progress, you may find that different grits are necessary depending on your stone and

application. The enclosed "How to use Diamond Abrasives to Cut Gemstones" book will

help you with your understanding as well as searching the internet or joining local

lapidary clubs. As with all stone cutting and cab making, practice and experimentation

are the keys to success.

Transform

rocks ...

THE ART OF CABBING

into gems!

FIG. M