ACU-RITE 2008 Instruction Manual - Page 7

Browse online or download pdf Instruction Manual for Weather Station ACU-RITE 2008. ACU-RITE 2008 16 pages.

Print Page

Intelli-Time

Intelli-Time products are pre-programmed with the correct time and date. All

you need to do is select your Time Zone and Daylight Saving Time preferences.

The clock will then automatically updates for Daylight Saving Time.

Set the Time, Date & Units

Press and HOLD the "

the preference you are currently setting will blink on the display.

To adjust the currently selected (flashing) item, press and release the "

" buttons (press and HOLD to fast adjust).

To save your adjustments, press and release the "

the next preference. The preference set order is as follows:

TIME ZONE ( PST MST CST EST AST HAST AKST)

DST* (Daylight Saving Time ON or OFF)

CLOCK HOUR

CLOCK MINUTE

CALENDAR DATE

CALENDAR MONTH

CALENDAR YEAR

TEMPERATURE SCALE (ºF or ºC)

BAROMETRIC PRESSURE SCALE (inHg or hPa)

*If you live in an area that observes daylight saving time, DST should be set to

ON, even if it is not currently Daylight Savings Time.

You will automatically exit SETUP MODE if no buttons are pressed for 20

seconds. Enter setup mode at any time by pressing the "

This weather station's color display features a backlight with brightness levels

including High, Medium and Low brightness settings.

Using battery power alone, the backlight is available momentarily for 7

seconds by pressing the "BACKLIGHT" button, located on top of the display.

When display is powered with the power adapter, the display's brightness can

be adjusted using the "LIGHT" switch, located on the back of the display inside

the battery compartment. The switch offers four different backlight settings:

High (100%) brightness, Medium (60%) brightness, Low (30%) brightness and

Off (0%), or no backlight.

Clock

" button to enter SETUP MODE. Once in setup mode,

" button again to adjust

" or

" button.