ACU-RITE 4409999 Instruction Manual - Page 11

Browse online or download pdf Instruction Manual for Weather Station ACU-RITE 4409999. ACU-RITE 4409999 16 pages.

Print Page

Troubleshooting

No outdoor sensor

reception

no bars

Display screen

not working

Outdoor

temperature

is flashing or

showing dashes

Inaccurate

temperature

or humidity

If your AcuRite product does not operate properly after

trying the troubleshooting steps, call (877) 221-1252 or

email [email protected] for assistance.

If the wireless signal indicator shows no bars:

• Relocate the display and/or the outdoor sensor. The

units must be within 100 m (330 ft) of each other.

• Make sure both units are placed at least 90 cm

(3 feet) away from electronics that may interfere with

the wireless communication (such as TVs, microwaves,

computers, etc).

• Use standard alkaline batteries. Do not use heavy

duty or rechargeable batteries. NOTE: It may take

a few minutes for display and sensor to synchronize

after batteries are replaced.

• Check that the power adapter is plugged into the

display and an electrical outlet.

Flashing of the outdoor temperature is generally an

indication of wireless interference.

1. Bring both the sensor and display indoors and

remove at least one battery from each.

2. Make sure the A-B-C switch on both units match.

3. Reinstall the batteries in the outdoor sensor.

4. Reinstall the batteries in the display.

5. Let the units sit within a couple feet of each other

for a few minutes to gain a strong connection.

• Make sure both the display and sensor are placed out

of direct sunlight and away from any heat sources or

vents (see page 8).

• Make sure both units are positioned away from

moisture sources (see page 8).