Epson ET-7700 Start Here - Page 2

Browse online or download pdf Start Here for All in One Printer Epson ET-7700. Epson ET-7700 4 pages.
Also for Epson ET-7700: Quick Manual (17 pages)

Print Page

When the ink tank is full, remove the ink bottle and

securely close the ink tank cap. Place the remaining ink

aside; you will need it later.

Note:

Replace the bottle cap and tighten it.

Repeat the previous steps for the other colors.

Close the ink tank cover and then the scanner unit.

Connect the power cord to the back of the product and to

an electrical outlet.

Caution:

Do not connect to your computer yet.

Raise the control panel, then press the

turn on the product.

Note:

If an error message appears, turn off the product and

check that no protective material has been left inside the product.

Press

to select your language on the LCD screen,

then press the OK button. Follow steps 11 and 12 to

continue ink charging.

Note:

You can change this setting later using the product's

control panel. For more information, see the online User's Guide.

When the message to see the Start Here sheet appears

on the LCD screen, press the OK button. On the next

screen, press and hold the OK button for 3 seconds.

power button to

When the message to start initialization appears on the

LCD screen, press the

the ink. Ink charging takes approximately 7 minutes. A

message appears when ink charging is complete. Press

the OK button to continue.

Note:

After some ink is used for charging, the rest is available for

printing.

Caution:

Do not turn off the product, raise the scanner unit, or

load paper while the product is charging or you'll waste ink.

Follow the on-screen instructions to adjust the print

quality. Press the OK button to continue.

Note:

You can change these settings later using the product's

control panel. For more information, see the online User's Guide.

To complete filling the ink tanks, repeat steps 1 through 6

using the remaining ink in the bottles.

Note:

Replace the bottle cap before disposing of the bottles.

Press the OK button to proceed. Follow the on-screen

instructions to reset the ink levels.

Close the ink tank cover and scanner unit.

Load paper

See the online User's Guide for information about available

paper types and sizes, loading capacity, rear feed loading, and

loading CD/DVD/Blu-ray™ discs.

Output tray

Cassette 1

You can load the following paper sizes:

• Cassette 1: 3.5 × 5-, 4 × 6-, or 5 × 7-inch photo paper

• Cassette 2: Letter-, A4-, legal-size, or 8 × 10-inch paper

See the instructions below for loading paper.

Raise the control panel and lower the front cover.

start button to start charging

Cassette 2/front cover