Cisco MCS 7800 Series Quick Start Manual

Browse online or download pdf Quick Start Manual for Conference System Cisco MCS 7800 Series. Cisco MCS 7800 Series 2 pages. Multiplatform phones
Also for Cisco MCS 7800 Series: Quick Start Manual (12 pages), Quick Start Manual (2 pages), End User Manual (6 pages), Quick Reference (2 pages), Firmware Migration Master Manual (31 pages), Quick Start Manual (2 pages), Manual (43 pages), Manual (4 pages), Get Started (6 pages), Installation Manual (39 pages), Manual (20 pages), Quick Start Manual (2 pages)

Print Page
Cisco MCS 7800 Series Quick Start Manual
Your Phone
Cisco IP Phone 7841 shown.
1
`Incoming call or voicemail indicator
2
Line and feature buttons
3
Softkeys
4
Navigation
5
Hold, Transfer, and Conference
6
Speakerphone, Headset, and Mute
7
Voicemail, Applications, and Directory
8
Volume
Cisco IP Phone 7800 Series Multiplatform Phones
Line and Feature Buttons
Use the line and feature buttons to view calls on a line,
access features such as Speed Dial, and to perform tasks
such as resuming a held call.
Buttons illuminate to indicate status:
Green, steady: Line is idle
x
Red, steady: Line in use
x
Red, flashing: Incoming or held call
x
Amber, steady: Line is unregistered
x

Quick Start Guide

Place a Call
Enter a number and pick up the handset.
Answer a Call
Press the flashing red line button.
Put a Call on Hold
1. Press Hold
.
2. To resume a call from hold, press Hold again.
View Your Recent Calls
1. Press Applications
.
2. Scroll and select Recents.
3. Select a line to view.
Transfer a Call to Another Person
1. From a call that is not on hold, press Transfer
2. Enter the other person's phone number.
3. Press Transfer again (before or after the party
answers).
Add Another Person to a Call
1. From an active call, press Conference
2. Enter the number you want to join and press Dial.
3. Once the call is connected, press Conference again.
.
.
April 2017