Epson Expression Premium XP-800 Start Here - Page 3
Browse online or download pdf Start Here for All in One Printer Epson Expression Premium XP-800. Epson Expression Premium XP-800 4 pages. Small-in-one
Also for Epson Expression Premium XP-800: Startup Manual (4 pages), Manual (46 pages), Range Manual (7 pages), Product Overview And Specifications (2 pages), Basic Manual (28 pages)
Print Page
6
Connect the fax line
To fax, connect a phone cord to a telephone wall jack and
to the LINE port on the back of your product. To connect a
telephone or answering machine, use the EXT. port on your
product. See the online User's Guide for more details.
Note: If you're connecting to a DSL phone line, you must use a DSL
filter or you won't be able to fax. Contact your DSL provider for the
necessary filter.
7
Install software
Note: If your computer does not have a CD/DVD drive, you can
download the software from the Epson website (see "Epson technical
support").
Caution: Be sure to close your other programs, including any screen
savers and virus protection software, before beginning this software
installation.
1
M ake sure the printer is
NOT CONNECTED to your
computer.
Windows
: If you see a Found New
®
Hardware screen, click Cancel and
disconnect the USB cable. You can't
install your software that way.
2
Insert the product CD.
3
W indows: If you see the AutoPlay
window, click Run Setup.exe. If you see the User
Account Control screen, click Yes or Continue.
M ac OS X: Double-click the
necessary.
4
C lick Install (Windows) or Continue (Mac OS X) and
follow the instructions on your computer screen.
5
W hen you see the Select Your Connection screen, check
the "Connection options" section on this sheet for more
information.
C hoose your connection. Then click Next (Windows) or
Continue (Mac OS X) and follow the instructions on your
computer screen.
Epson icon, if
Connection options
Wireless connection
You must install the software on every computer from which
you want to print. For the first installation, we recommend using
a USB cable (not included) to simplify wireless setup. After the
printer is connected to the network, you will be prompted to
remove the cable.
If you're using Mac OS X 10.6.x, 10.7.x, or 10.8, or you don't
have a USB cable, you will need to use the control panel on
the printer to select wireless settings. Follow the instructions
on your computer screen during software installation; they will
explain how to connect the printer wirelessly this way.
M ake sure you know your network name (SSID) and network
password:
• Network name
• Network password
If you don't have this information, contact the person who set
up your network.
To view how-to videos on setting up your printer's wireless
connection, go to epson.com/support (U.S.) or epson.ca/
support (Canada).
Direct USB connection
Make sure you have a USB cable (not included).
Wired network connection
Make sure you have an Ethernet
You must install the software on every computer from which
you want to print.
Any problems?
If you experience problems during setup, see below:
Network setup was unsuccessful.
• Make sure you select the right network name (SSID).
• If you see a firewall alert message, click Unblock or Allow to
let setup continue.
• If your network has security enabled, make sure you enter
your network password (WEP key or WPA passphrase)
correctly. Passwords must be entered in the correct case.
Press the touch screen buttons repeatedly to scroll through
characters.
Press
or
to move the cursor.
Press
to delete.
Press Done when you're finished entering your password.
You see error messages on the printer's screen.
See your Quick Guide for troubleshooting information.
network cable (not included).
®