DigiTech Bass Whammy Owner's Manual - Page 15

Browse online or download pdf Owner's Manual for Music Pedal DigiTech Bass Whammy. DigiTech Bass Whammy 18 pages.
Also for DigiTech Bass Whammy: User Manual (17 pages), Manual (17 pages), Quick Start Manual (2 pages)

Print Page
DigiTech Bass Whammy Owner's Manual

Calibrating the Expression Pedal

In the unlikely event that the Expression Pedal does not respond properly or that the note does
not bend or return to the correct pitch, it may need to be re-calibrated. The following steps outline
the procedure for Expression Pedal re-calibration:
1. Disconnect the power from the Bass Whammy pedal.
2. Press and hold the E ect On/O Footswitch while reconnecting the power. This
enables MIDI and Calibration Setup. Wait for one of the Whammy, Detune, or
Harmony LEDs to begin ashing (indicating the currently selected MIDI channel) then
release the footswitch.
3. Rock the Expression Pedal fully forward (toe down) and fully back (toe up) at least two
times. The 4 Harmony LEDs will light back and forth (from OCT DN/4TH DN to OCT
UP/2 OCT UP) as the pedal is rocked indicating the pedal is calibrating.
4. When nished, press the E ect On/O Footswitch again to exit the MIDI and
Calibration set up and return to normal operation.