ACU-RITE Iris 06106 Instruction Manual - Page 9

Browse online or download pdf Instruction Manual for Weather Station ACU-RITE Iris 06106. ACU-RITE Iris 06106 12 pages. Mini display

Print Page

Troubleshooting

Problem

No outdoor sensor

reception

no bars

Outdoor

temperature

is flashing or

showing dashes

Inaccurate forecast

Inaccurate

temperature

or humidity

No rainfall

If the wireless signal indicator shows no bars:

• Relocate the display and/or the outdoor sensor.

The units must be within 330 ft (100 m) of each other.

• Make sure both units are placed at least 3 feet (.9 m) away from

electronics that may interfere with the wireless communication

(such as TVs, microwaves, computers, etc.).

• Use standard alkaline batteries (or lithium batteries in sensor

when temperature is below -4˚F/-20˚C). Do not use heavy-

duty or rechargeable batteries. NOTE: It may take a few

minutes for display and sensor to synchronize after batteries

are replaced.

Flashing of the outdoor temperature is generally an indication of

wireless interference.

1. Bring both the sensor and display indoors and remove batteries from each.

2. Make sure the A-B-C switches on both units match.

3. Reinstall batteries in the outdoor sensor.

4. Reinstall batteries in the display.

5. Let the units sit within a couple feet of each other for a few

minutes to gain a strong connection.

• Weather Forecast icon predicts conditions for the next 12 to 24

hours, not current conditions.

• Has Learning Mode icon disappeared from the display?

Learning Mode must complete before forecast and pressure will

be accurate.

• Allow unit to run continuously for 33 days. Battery removal or

resetting the display will restart Learning Mode. After 14 days,

forecast should be fairly accurate, however Learning Mode

calibrates for a total of 33 days.

• Make sure both the display and sensor are placed out of direct

sunlight and away from any heat sources or vents (see page 6).

• Make sure both units are positioned away from moisture

sources (see page 6).

• Check that the batteries are installed correctly. Batteries may

need to be replaced.

• Reset the display by pressing and holding the RESET button,

located in the battery compartment of the display. Date and

time will need to be entered after a reset.

Possible Solution