Cisco Quick Set C20 User Manual - Page 15

Browse online or download pdf User Manual for Conference System Cisco Quick Set C20. Cisco Quick Set C20 48 pages. Tc7.3, english, december 2015
Also for Cisco Quick Set C20: Getting Started Manual (41 pages), User Manual (44 pages), Getting Started Manual (42 pages), Getting Started Manual (35 pages), Quick Reference Manual (2 pages), Quick Reference Manual (2 pages), User Manual (25 pages), Troubleshooting Manual (37 pages), Installation Sheet (2 pages), Quick Reference Manual (2 pages), Quick Reference Manual (2 pages), Getting Started Manual (32 pages), Getting Started Manual (42 pages), Getting Started Manual (46 pages)

Print Page
Cisco Quick Set C20 User Manual
Cisco TelePresence System Profile-series, C-series codecs, Quick Set C20
Contents
Getting started
Getting started

Camera settings

Camera settings let you adjust the exposure and whitebalance.
Do as follows:
1.
Press the
key on the remote control to display the Layout menu. Select Selfview
to be shown as required.
Adjusting the exposure of the camera
CAMERA SETTINGS
Exposure
Whitebalance
Brightness mode: Auto
Brightness level: 1
Backlight: Off
Backlight compensates for any backlight shining on
the camera from behind you. Such light conditions
will tend to make you appear darker than needed.
D14852.01
User guide Cisco TelePresence Profile, C-series codecs, Quick Set C20, July 2011.
All contents are copyright © 2010–2011 Cisco Systems, Inc. All rights reserved.
Making calls
If you change the Brightness
mode to Manual, the
EXPOSURE
Brightness level becomes
possible for you to set. Since
Auto has been chosen here,
the actual level is shown
ghosted.
Phone book usage
In-call features
2.
Press the
key to display the Home menu and select Camera control.
3.
This will cause softbuttons to appear. Press the Function key corresponding to
Camera settings (Function key number 2 from the left).
4.
Follow the procedures outlined below.
Adjusting the whitebalance of the camera
CAMERA SETTINGS
Exposure
Whitebalance
Whitebalance mode: Manual
Whitebalance level: 1
Since the whitebalance has been set to Manual in this case, you will have access to
setting the whitebalance in the usual manner. Use Automatic if that is more convenient.
15
Advanced settings
Contact us
WHITEBALANCE
www.cisco.com
User guide