Cisco Quick Set C20 User Manual - Page 39

Browse online or download pdf User Manual for Conference System Cisco Quick Set C20. Cisco Quick Set C20 48 pages. Tc7.3, english, december 2015
Also for Cisco Quick Set C20: Getting Started Manual (41 pages), User Manual (44 pages), Getting Started Manual (42 pages), Getting Started Manual (35 pages), Quick Reference Manual (2 pages), Quick Reference Manual (2 pages), User Manual (25 pages), Troubleshooting Manual (37 pages), Installation Sheet (2 pages), Quick Reference Manual (2 pages), Quick Reference Manual (2 pages), Getting Started Manual (32 pages), Getting Started Manual (42 pages), Getting Started Manual (46 pages)

Print Page
Cisco Quick Set C20 User Manual
Cisco TelePresence System Profile-series, C-series codecs, Quick Set C20
Contents
Getting started
Sharing contents
General recommendations tips for making your video meeting room as good as
possible are described in the Administrator guide for this product. The Administrator
guide may be downloaded from www.cisco.com/go/telepresence/docs.
Dual video stream
With dual video stream you can view two different live video streams simultaneously—
the main video and one additional source. This could for example be both a PC
(presentation and the person who gives the presentation.
If a video system does not support dual video stream, no second video stream will be
established for this system and the PC presentation will be shown as the main video.
D14852.01
User guide Cisco TelePresence Profile, C-series codecs, Quick Set C20, July 2011.
All contents are copyright © 2010–2011 Cisco Systems, Inc. All rights reserved.
Making calls
Phone book usage
39
In-call features
In-call features
Sharing PC contents
Make sure the PC does not cover any of the microphones.
This will reduce the perceived audio quality at the far end.
Locate the DVI cable and connect the PC to the video system.
Connect the audio mini-jack output from the PC, or any other
source—including Ipod—to the mini-jack socket of the cable to
get sound. Connect the RCA connectors to the corresponding
sockets on the codec/endpoint.
When pressing the Presentation button (
control the default presentation source is activated.
The DVI / VGA input is compliant with VESA Extended Display
Identification Data (EDID) and will be able to notify the PC of the
supported output formats.
If the shared contents fail to show
•
Normally you must press a special key combination to switch the PC image from the PC
screen to the video screen.
•
Check that the presentation source is correctly defined. Access to this setting may be
password protected by your system administrator. The procedure is described in the
Administrator guide for this product.
•
Make sure your PC is set to activate your VGA output.
Selecting the source
To specify which source to serve as presentation source select it as shown here. Note that
the name of each source can be changed, consult your administrator for details on this. All
the options are not available to all systems.
HOME
Call
Presentation
Camera control
Settings
User guide
Advanced settings
Contact us
)on the remote
HOME
PRESENTATION
Secondary camera (no signal)
Call
PC
Presentation
DVD
Camera control
Document camera
Settings
No presentation
www.cisco.com