Cisco TelePrescence SpeakerTrack 60 Manual - Page 13
Browse online or download pdf Manual for Conference System Cisco TelePrescence SpeakerTrack 60. Cisco TelePrescence SpeakerTrack 60 22 pages.
Print Page
- 1. Table of Contents
- 2. Appendix Factory Reset
- 3. Software
- 4. Connect Speakertrack 60 to SX80 Codec
- 5. Connect Speakertrack 60 to Codec C40
- 6. Connect Speakertrack 60 to Codec C60
- 7. Connect Speakertrack 60 to Codec C90
- 8. Precision 60
- 8. Speakertrack 60
- 8. Reset the Cameras
- 8. Appendix
- 8. Technical Specifications
- 8. Speakertrack 60
- 8. Contact Us
Cisco TelePresence Precision 60 and SpeakerTrack 60
Contents
Connect SpeakerTrack 60 to Codec C60
•
Connect the video cables to the codec's camera inputs
(HDMI 1 and 2).
•
Connect Ethernet to the codec's 2nd or 3rd Ethernet port.
•
Connect to power.
For further information about camera assembly and cabling,
refer to the SpeakerTrack 60 installation guide:
http://www.cisco.com/go/telepresence/docs
When using a SpeakerTrack 60 with a C Series codec, the
codec cannot be controlled with a Cisco Remote Control
TRC5. Instead, a Cisco TelePresence Touch 8 user interface
or an external control device must be used.
HDMI 1
HDMI 2
D15296.03 Cisco TelePresence Precision 60 and SpeakerTrack 60, APRIL 2016.
Introduction
Physical interface
RJ45
Power
(100-240 V
, 50/60 Hz)
AC
Connecting the camera
Connecting the camera
Power
adapter
Always use the provided power cable
and adapter (12 V
, minimum 3 A).
DC
13
Camera guide
Factory reset
Appendix
Copyright © 2016 Cisco Systems, Inc. All rights reserved.