Chapter 3
Configuring a Cisco Unified Communications Manager SIP Trunk with a Cisco TelePresence
Field
Device Name contains
Available Devices
Port(s)
Current Route Group Members
Selected Devices
Removed Device
Route Group Members
List of Device
Description
Enter the character(s) that are found in the device name that you are
seeking and click the Find button. Device names that match the
character(s) that you entered display in the Available Devices box.
Note
To find all available devices, leave the text box blank and click the
Find button.
Choose a device in the Available Devices list box and add it to the Selected
Devices list box by clicking Add to Route Group.
If the route group contains a gateway that uses the QSIG protocol, only
gateways that use the QSIG protocol display in the list. If the route group
contains a gateway that uses the non-QSIG protocol, gateways that use the
controlled intercluster trunks, which are QSIG protocol do not display in
the list.
If you included the route group in a route list that contains QSIG gateways,
the H.323 gateways do not display in the list.
If this device supports individually configurable ports, choose the port.
(Devices that allow you to choose individual ports include Cisco Access
Analog and Cisco MGCP Analog gateways and T1 CAS.) Otherwise,
choose the default value (Allor None Available, depending upon the device
that is chosen). For a device that has no ports available (None Available),
the device may be already added to the Route Group, or cannot be added
to the route group.
To change the priority of a device, choose a device name in the Selected
Devices list box. Move the device up or down in the list by clicking the
arrows on the right side of the list box.
To reverse the priority order of the devices in the Selected Devices list box,
click Reverse Order of Selected Devices.
For more information about the order of devices in a route group, see
"Route Plan Overview" in the Cisco Unified Communications Manager
System Guide.
Choose a device in the Selected Devices list box and add it to the Removed
Devices list box by clicking the down arrow button between the two list
boxes.
Note
You must leave at least one device in a route group.
This pane displays links to the devices that have been added to this route
group. Click one of the device names to go to the configuration window for
that particular device.
Note
When you are adding a new route group, this list does not display
until you save the route group.
Cisco TelePresence Content Server Release 6.2.1 Administration and User Guide
CUCM Integration with Content Server 6.2
3-25
Print Page