Argo CRONO Operating Instructions Manual - Page 13

Browse online or download pdf Operating Instructions Manual for Air Conditioner Argo CRONO. Argo CRONO 16 pages. Local

Print Page

(1) ON/OFF BUTTON

Press this button to switch the unit on or off.

(2) DOWN BUTTON

Press this button to adjust the temperature and set the time.

(3) UP BUTTON

Press this button to adjust the temperature and set the time.

(4) SLEEP BUTTON

In cooling mode, press the UP and FAN buttons to activate the Sleep mode, after which the unit will return to

the silent mode and save energy.

N.B.:

The Sleep function is not available in the dehumidifying or fan modes but only in cooling mode.

(5 and 6) SPEED BUTTON

In the cooling and fan modes, press this button to adjust the ventilation speed to low (Low) or high (High). In certain

conditions, the fan speed may not function according to the settings.

In dehumidifying mode, it's not possible to select the ventilation speed, therefore fan will forcefully choose the low fan speed.

MODE BUTTON: (7) FAN – (8) DEHUMIDIFICATION – (9) COOLING

When the unit is on, press this button to choose the desired mode among: FAN, DEHUMIDIFYING and COOLING.

(10) TEMPERATURE AND ERROR DISPLAY

Problem

Cause

Room temperature sensor failure.

Failure of temperature sensor on the

evaporator.

(11) WATER FULL TANK ALARM

When the water tank is full a lamp on panel will turn on and buzzer with alarm.

(12) TIMER BUTTON

a. When the air conditioner is off, press "TIMER" to set when to switch the unit on. Press "+" o "–" to set the time, and press

"TIMER" again to confirm.

b. When the air conditioner is on, press "TIMER" to set when to switch the unit off. Press "+" o "–" to set the time, and press

"TIMER" again to confirm.

c. After setting the time, press "TIMER" to cancel the time setting.

V 12/19

Solution

Contact a service centre.