ACU-RITE 00606TXA1 Instruction Manual - Page 5
Browse online or download pdf Instruction Manual for Thermometer ACU-RITE 00606TXA1. ACU-RITE 00606TXA1 7 pages. Wireless thermometer
Print Page
Troubleshooting
If the wireless signal indicator shows no bars:
• Relocate the display unit and/or the outdoor sensor.
The units must be within 165 ft (50 m) of each other.
• Make sure both units are placed at least 3 feet (.9 m)
No outdoor sensor
away from electronics that may interfere with the
reception
computers, etc).
no bars
• Use standard alkaline batteries (or lithium batteries in
may take up to 20 minutes for display unit and sensor
to synchronize after batteries are replaced.
Flashing of the outdoor temperature is generally an
indication of wireless interference.
Outdoor
1. Bring both the sensor and display unit indoors and
remove at least one battery from each.
temperature
2. Reinstall the battery in the outdoor sensor.
showing dashes
3. Reinstall the battery in the display unit.
for about 20 minutes to gain a strong connection.
• Make sure both the display unit and sensor are
Inaccurate
placed out of direct sunlight and away from any heat
temperature
sources or vents (see page 6).
Display screen
• Check that the batteries are installed correctly.
Batteries may need to be replaced.
not working
If your AcuRite product does not operate properly after trying
the troubleshooting steps, visit www.AcuRite.com or call
(877) 221-1252 for assistance.
8
Care & Maintenance
Display Unit Care
away from dust, dirt and moisture. Clean ventilation ports regularly with a
gentle puff of air.
Outdoor Sensor Care
Outdoor: -40ºF to 158ºF; -40ºC to 70ºC
TEMPERATURE RANGE
Indoor: 32ºF to 122ºF; 0ºC to 50ºC
165 ft / 50 m
WIRELESS RANGE
WIRELESS FREQUENCY
433.92MHz
POWER
Sensor: 2 x AA alkaline or lithium batteries
30 second updates
DATA REPORTING
FCC Information
This device complies with part 15 of FCC rules. Operation is subject to the following two conditions:
2- This device must accept any interference received, including interference that may cause undesired operation.
rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equip-
ment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
This device complies with Industry Canada's licence-exempt RSSs.
Operation is subject to the following two conditions:
(1) This device may not cause interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation of the device.
Cet appareil est conforme aux CNR exemptes de licence d'Industrie Canada . Son fonctionnement est soumis aux deux conditions suivantes :
( 1 ) Ce dispositif ne peut causer d'interférences ; et
( 2 ) Ce dispositif doit accepter toute interférence , y compris les interférences qui peuvent causer un mauvais fonctionnement de l'appareil.
depending on home construction materials
9