Cisco TelePresence IX5000 Manual - Page 36

Browse online or download pdf Manual for Conference System Cisco TelePresence IX5000. Cisco TelePresence IX5000 44 pages. Field-replaceable units and countryand region-specific power connectors
Also for Cisco TelePresence IX5000: Quick Start User Manual (15 pages), User Manual (26 pages), Installation Manual (36 pages), First-Time Setup (40 pages)

Print Page

Replacing a Codec—Part Number CTS-5K-ENCODER= or CTS-5K-HOSTCPU=

Step 14

Using two people, remove the display so that it lifts clear of the display shelf.

Step 15

Install the display and replace all other components in the reverse order that you removed them. Note

that this display goes on without the add-ons used for the left and right displays (spool and bracket).

Step 16

Be sure to power on the PDUs before you re-install the bottom fascia.

Replacing a Codec—Part Number CTS-5K-ENCODER= or

CTS-5K-HOSTCPU=

IMPORTANT NOTE

You must disconnect the power to the switch and the table, and disconnect the Touch 10 devices, after

you replace the codec. For more information, refer to the

section of the

Required Tools

•

IX5000 Field-Replaceable Units and Country- and Region-Specific Power Connectors

IX5000 and IX5200 First-Time Setup

#2 and #3 Phillips Driver

Wiring diagram

"Preventing Touch 10 Configuration Issues"

document.