Cisco TelePresence MX Series Getting Started Manual - Page 22
Browse online or download pdf Getting Started Manual for Conference System Cisco TelePresence MX Series. Cisco TelePresence MX Series 41 pages. Telepresence ex, mx, quick set c20, codec c, sx20 quick set, profile series video systems
Also for Cisco TelePresence MX Series: Getting Started Manual (42 pages)
Print Page
Cisco TelePresence Video Systems
Contents
Setting the Administrator settings menu password
When starting up the system for the first time, the Administrator
Settings menu password is not set.
NOTE:
We strongly recommend that you define a password to
protect the Administrator Settings menu, because these settings
affect the behavior of the video conference system.
1. Go to
Home > Settings > Administrator settings > Set menu
password.
On the remote control, press the # key to toggle between
lower or upper case characters and numbers: abc/ABC/123.
2. Enter the menu password. The password you enter is
hidden; each character is replaced with an asterisk (*).
3. Select
Save
to confirm the changes, or
without saving.
4. Press
Home
(
) to exit.
Back to task overview
D14639.12 Video Systems Getting Started Guide TC7.0, DECEMBER 2013.
Introduction
User interfaces
Cancel
to leave
Confirguration
Configuration
22
Getting Started Guide
Appendices
Contacts
Copyright © 2010–2013 Cisco Systems, Inc. All rights reserved.