ACU-RITE 00609SBDIA Instruction Manual - Page 4

Browse online or download pdf Instruction Manual for Thermometer ACU-RITE 00609SBDIA. ACU-RITE 00609SBDIA 12 pages. Wireless thermometer
Also for ACU-RITE 00609SBDIA: Instruction Manual (12 pages)

Print Page
ACU-RITE 00609SBDIA Instruction Manual

SETUP

Main Unit Detachable Stand
Included with the main unit is a detachable
stand for tabletop placement.

Install or Replace Batteries

AcuRite recommends high quality alkaline
batteries for the best product performance. Heavy duty or rechargeable
batteries are not recommended.
The outdoor sensor requires lithium batteries in low temperature conditions.
Cold temperatures can cause alkaline batteries to function improperly. Use
lithium batteries in the outdoor sensor for temperatures below -4ºF / -20ºC.
Select Degrees Fahrenheit or Celsius
To select between degrees Fahrenheit (ºF) or Celsius (ºC) temperature units,
press the "ºF/ºC" button located on the back of display.
PLEASE DISPOSE OF OLD OR DEFECTIVE BATTERIES IN AN ENVIRONMENTALLY SAFE
WAY AND IN ACCORDANCE WITH YOUR LOCAL LAWS AND REGULATIONS.
BATTERY SAFETY: Clean the battery contacts and also those of the device prior to battery installation. Remove batteries from equipment which is not to be
used for an extended period of time. Follow the polarity (+/-) diagram in the battery compartment. Promptly remove dead batteries from the device. Dispose of used
batteries properly. Only batteries of the same or equivalent type as recommended are to be used. DO NOT incinerate used batteries. DO NOT dispose of batteries in fre,
as batteries may explode or leak. DO NOT mix old and new batteries or types of batteries (alkaline/standard). DO NOT use rechargeable batteries. DO NOT recharge
non-rechargeable batteries. DO NOT short-circuit the supply terminals.
Outdoor Sensor
1. Slide off the battery compartment cover.
2. Insert 2 x AA batteries into the battery
compartment, as shown. Follow the polarity
(+/-) diagram in the battery compartment.
3. Replace the battery cover.
Display Unit
1. Slide off the battery compartment cover.
2. Insert 2 x AA batteries into the battery
compartment, as shown. Follow the polarity
(+/-) diagram in the battery compartment.
3. Replace the battery cover.
4