Cisco TelePresence MX300 Getting Started Manual - Page 16

Browse online or download pdf Getting Started Manual for Conference System Cisco TelePresence MX300. Cisco TelePresence MX300 42 pages. Telepresence c series telepresence mx series telepresence sx series telepresence ex series
Also for Cisco TelePresence MX300: Manual (2 pages), Quick Reference Manual (2 pages), Quick Start Manual (12 pages), Quick Reference Manual (2 pages), Troubleshooting Manual (37 pages), Getting Started Manual (46 pages)

Print Page

Cisco TelePresence MX300 Getting Started Manual

Cisco TelePresence Systems

GettinG started Guide

Table of contents

Introduction

touch controller

Setting date, time and location

(when not set by a provisioning system)

When setting up your video conference system, you

should check that the date and time settings are correct.

Among other things this information is used to time stamp

messages transmitted to gatekeepers and other network

elements.

The time is shown in the top right corner of the Touch

controller display.

Back to task overview

User interfaces

Configuration

1. Tap

More > Settings > Administrator settings > Date,

Time &

Location.

2. Tap

24h

12h

to select the

3. Tap dd.mm.yy,

mm.dd.yy

yy.mm.dd

Format

you prefer.

4. Select the

Time Zone

your system is in. Step through the

list of available zones by tapping the - or + signs.

5. Set

Date & Time Mode

Auto

to be regularly updated; otherwise, select Manual.

If you select Manual, enter the correct value for Hour,

Minute, Year, Month, and Day. Tap the plus and minus

signs to increase or decrease a value.

If you select Auto, the NTP server address can be

automatically obtained from the network (set the

Mode

to Auto) or you can enter the

yourself (set

NTP Mode

to Manual).

6. Tap

Save

to save the changes, or

saving.

7. Tap

Exit

to return to the home menu.

Appendices

Time Format

you prefer.

to select the

Date

if you want time and date

NTP

NTP Server

address

Undo

to leave without