Cisco TelePresence MX700 Getting Started Manual - Page 9

Browse online or download pdf Getting Started Manual for Conference System Cisco TelePresence MX700. Cisco TelePresence MX700 46 pages. Single camera on a free standing floor stand or a floor stand secured to the wall
Also for Cisco TelePresence MX700: Installation Manual (32 pages), Quick Start Manual (12 pages), Installation Manual (28 pages), Installation Manual (29 pages), Installation Manual (32 pages), Quick Reference Manual (2 pages), Manual (45 pages), Manual (45 pages), Installation Manual (29 pages), Quick Reference Manual (2 pages), Quick Reference Manual (2 pages)

Print Page

Cisco TelePresence MX700 Getting Started Manual

Cisco TelePresence Video Systems

Contents

Configuration tasks

The initial configuration tasks are described on the following

pages. Click the

hyperlink for the method you

want to use to find the task description.

Getting started

Here you can see how to wake up the system and start using

one of the user interfaces:

Touch controller

Remote control

and on screen menu

Web interface

Set up assistant

(SX10)

D14639.15 Video Systems Getting Started Guide TC7.2, OCTOBER 2014.

Introduction

User interfaces

Click the

to this task overview.

Provisioning set-up

(when using a provisioning system)

Your system may be configured by an external provisioning

system. This way a number of settings are provisioned automati-

cally, and you most likely do not have to set the IP, H.323, SIP

and Time and Date settings.

Choose one of the following methods to set-up the provision-

ing parameters:

Touch controller

Remote control

and on screen menu

Web interface

Set up assistant

(SX10)

Configuration

Back...

button in the task description to go back

Getting Started Guide

Appendices

Setting the IP parameters

(when not set by a provisioning system)

Your video conference system must be connected to an IP

network. Both IP version 4 (IPv4) and IP version 6 (IPv6) are

supported. In both cases, the IP parameters can be assigned

automatically by the network, or you can set everything manually.

Choose one of the following methods to set the IP parameters:

Touch controller

Remote control

and on screen menu

Web interface

Set up assistant

(SX10)

Contacts