Cisco Telepresence MX800 Installation Manual - Page 23

Browse online or download pdf Installation Manual for Conference System Cisco Telepresence MX800. Cisco Telepresence MX800 30 pages. Wall-mounted mx800 single
Also for Cisco Telepresence MX800: Quick Start Manual (12 pages), Installation Manual (16 pages), Replacement Manual (46 pages), Replacement Manual (47 pages), Spare Parts (24 pages), Installation Manual (16 pages), Quick Reference Manual (2 pages), Manual (45 pages), Manual (45 pages), Quick Reference Manual (2 pages), Quick Reference Manual (2 pages), Getting Started Manual (46 pages)

Cisco Telepresence MX800 Installation Manual
Installation guide for Cisco TelePresence MX800 Dual - Floor stand
17

Mount loudspeakers

H
Three loudspeakers are pre-installed. Follow
steps 1-3 for the remaining eight loudspeakers.
Connect the cable to the loudspeaker. Use
1
the cable that is marked with the correct
loudspeaker position. Loudspeaker cable 1
above the right monitor is not used.
Enter the loudspeaker onto the speaker clip.
2
Make sure that no cables are pinched.
78-100574-02A0 | 2016 JUNE | © 2016 Cisco Systems, Inc. All rights reserved.
The loudspeaker cables
are marked with a
number. These numbers
must match the position
of the loudspeakers, as
shown here.
Cable number 1, above
the right monitor, is not
used.
Fasten with one screw.
3
8 ×
PT4x10 (one for each loudspeaker)
1
2
3
4
5
6
2
3
4
5
6
Page 23