Argo Extreme 11 Operating Instructions Manual - Page 5
Browse online or download pdf Operating Instructions Manual for Air Conditioner Argo Extreme 11. Argo Extreme 11 11 pages. Portable (local) air conditioner
Print Page
Insert the window without its closure cap.
Remove the hot air terminal connection from the retracting flexible hose.
Bring the air-conditioner close to the window and insert the air discharge tube.
Avoid tight curves and folds in the flexible hose.
Connect the power cord to a suitable electrical socket (230V).
Insert the batteries supplied into the remote control, respecting polarities.
This appliance can be used to Cool, Dehumidify, Fan. In changing from one mode to another, the fan continues operating
but the compressor stops; the compressor starts up again 3 and a half minutes later. This delay in start-up protects the
compressor from any damages.
Cooling, Ventilation
THE DISCHARGE TUBE MUST BE CONNECTED to the appliance AT ALL TIMES: the only exception is when the
appliance is used for Dehumidification only, in which case it is recommended that the appliance discharges
directly into the environment to obtain maximum efficiency (see the paragraph entitled "Dehumidification Mode").
Clean the air filters under the easily removable rear grid regularly to keep the air-conditioner working efficiently.
1. COOLING MODE
The first time it is turned on, the air-conditioner will operate in Cooling mode with the temperature set to 25ºC by
default.
The temperature can be adjusted between 17° and 30°C.
In this way, each time the Power button is pressed, the unit switches off, the appliance saves the temperature set
and when switched back on again, it will retain this setting.
In this way, fan speed can be adjusted, the Timer, Eco function can be set.
2. DEHUMIDIFICATION MODE
Press FUNC to select Dehumidification until the relevant icon appears.
V 01/13
HOW TO USE THE APPLIANCE
OPERATING MODES
Dehumidification
15