Cisco TelePresence SX10 Quick Manual

Browse online or download pdf Quick Manual for Conference System Cisco TelePresence SX10. Cisco TelePresence SX10 2 pages. In-room control on touch 10
Also for Cisco TelePresence SX10: Installation Manual (8 pages), User Manual (26 pages), Quick Manual (2 pages), User Manual (34 pages), User Manual (29 pages), Preliminary User Manual (9 pages), User Manual (38 pages), Installation Manual (8 pages), User Manual (2 pages), User Manual (37 pages), Manual (45 pages), Manual (45 pages), Installation Manual (2 pages), User Manual (34 pages), User Manual (5 pages), User Manual (38 pages), User Manual (38 pages), Getting Started Manual (46 pages)

Print Page
Cisco TelePresence SX10 Quick Manual
Amcom Cisco SX10 Quick Guide
Remote Control and the Home Screen
Remote Control
Volume and Zoom control.
1.
Field selector / Cursor keys.
2.
OK / Enter key.
3.
Go back one step / Backspace.
4.
Microphone mute / Unmute.
5.
Place a call / Accept incoming call.
6.
Reject incoming call / End call /
7.
Cancel / Back to Home screen
(outside calls).
Keypad
8.
Home Screen
Access Settings, Standby mode
A.
and the Do No Disturb features.
Access the Camera Control menu.
B.
Place a Call.
C.
Share Content.
D.
Place a Call
Select Call from the home
1.
screen and press OK or press the
green Call button on the remote.
Enable Do Not Disturb
Using the remote, select the field
1.
in the upper left corner of the
Home screen and press OK.
All manuals and user guides at all-guides.com
1
2
3
4
5
6
7
1
2
3
8
.@
abc
def
4
5
6
ghi
jkl
mno
7
8
9
pqrs
tuv
wxyz
*
0
#
Use the Cursor keys to select the
2.
Search or Dial field, as outlined.
3.
Press the corresponding keys on
the remote to enter a number.
Tap the green Call button to place
4.
the call.
Select Available or Do Not Disturb.
2.
Press OK to save and exit
3.
the menu.
A
C
D
Operating Tips
Use the Cursor controls to move about the
screen and press OK / Enter to open the
selected menu field.
Use the Cancel key to exit a menu (and return to
the Home screen) undoing any changes.
Use the Back key to go just one step back.
Press the red End Call button or
5.
use the Cursor keys to select End.
Press OK to terminate the call.
6.
Operating Tips
Your system can be set to ignore
incoming calls, however, you may
still call others.
B