Sony BRC-300 Command List - Page 7

Browse online or download pdf Command List for Camcorder Sony BRC-300. Sony BRC-300 23 pages. 3ccd color video camera
Also for Sony BRC-300: Brochure & Specs (8 pages), Brochure & Specs (8 pages), Specifications (8 pages), Brochure (8 pages), Brochure (8 pages), Specifications (8 pages), Brochure & Specs (8 pages)

Print Page
Sony BRC-300 Command List

VISCA Command/ACK Protocol

Command
Command Message
General Command
81 01 04 38 02 FF
(Example)
81 01 04 38 FF
(Example)
81 01 04 38 02 FF
(Example)
81 01 04 08 02 FF
(Example)
Inquiry Command
81 09 04 38 FF
(Example)
81 09 05 38 FF
(Example)
Address Set
88 30 01 FF
IF_Clear (Broadcast)
88 01 00 01 FF
IF_Clear (For x)
8x 01 00 01 FF
Command Cancel
8x 2y FF
* When the address-switch is fixed at 0, the value x in 88 30 0x FF will be indeterminate.
Do not transmit the command (except Address Set,
IF_Clear, Command Cancel, CAM_Power), when
menu panel shows on the screen. In that case, clear the
menu panel first using CAM_Menu Command, and
then proceed.
Reply Message
90 41 FF (ACK)+90 51 FF
(Completion)
90 42 FF
90 52 FF
90 60 02 FF (Syntax Error)
90 60 03 FF
(Command Buffer Full)
90 61 41 FF
(Command Not Executable)
90 62 41FF
90 50 02 FF (Completion)
90 60 02 FF (Syntax Error)
88 30 02 FF
88 01 00 01 FF
z0 50 FF (Completion)
z0 6y 04 FF
(Command Canceled)
z0 6y 05 FF (No Socket)
Comments
Returns ACK when a command has been accepted, and
Completion when a command has been executed.
Accepted a command which is not supported or a command
lacking parameters.
There are two commands currently being executed, and the
command could not be accepted.
Could not execute the command in the current mode.
ACK is not returned for the inquiry command.
Accepted an incompatible command.
Returned the device address to +1.*
Returned the same command.
ACK is not returned for this command.
Returned when the command of the socket specified is canceled.
Completion for the command canceled is not returned.
Returned when the command of the specified socket has already
been completed or when the socket number specified is wrong.
7