Sony CA-590P Operation Manual - Page 12
Browse online or download pdf Operation Manual for Camcorder Sony CA-590P. Sony CA-590P 22 pages. Sdtv portable cameras
Also for Sony CA-590P: Brochure & Specs (14 pages)
Print Page
Switch
Audio to be mixed
S11-4
Program audio 2
S12
Tracker audio
When a one ear headset is used, set the S11-3 and S11-4
switches to ON.
H S13/S14 switches
These switches select the audio to be mixed with the
program audio output to the INCOM 2 connector.
Switch
Audio to be mixed
S13-1
Audio from INCOM 1 OFF
S13-2
Audio from INCOM 2 OFF
S13-3
Program audio 1
S13-4
Program audio 2
S14
Tracker audio
When a one ear headset is used, set the S13-1 and S13-2
switches to ON.
I S101 switch
Selects the item to be mixed with the battery alarm signal.
Switch
Item to be mixed
S101-1
Battery alarm signal
S101-2
TEMP
S101-3
FAN STOP
J S201 switches
Sets the talk level through the TRACKER connector.
– 20: Decreases the level by 20 dB.
0 : Standard level.
Normally, set this switch to 0.
K S251/S252 switches
These switches select the audio to be output to the
EARPHONE jack.
Switch
S251-1
Audio from INCOM 1
S251-2
Audio from INCOM 2
S251-3
Program audio 1
S251-4
Program audio 2
S252
Not used.
L S253 switches
These switches select the audio to be output to the
TRACKER connector.
Switch
S253-1
Audio from INCOM 1
S253-2
Audio from INCOM 2
S253-3
Program audio 1
12
Internal Boards and Switch Settings
Normal setting
OFF
OFF
Normal setting
ON
ON
OFF
Normal setting
ON
OFF
OFF
Audio to be output
Audio to be output
Switch
S253-4
Program audio 2
d DM-139 board
S1
S2
A S301 switch
Selects the direction of the prompter signal flow. The
signal flow direction must also be changed on the CCU.
RX: The video signal from the CCU is output from the
PROMPTER connector (factory-setting).
REM: Available in near future.
TX: The video signal input to the PROMPTER connector
is output to the CCU. Note that the CCU-550D/550DP
does not support this function.
B S302 switch
Selects the signal to be output from the PROMPTER
connector.
PROMPT: Prompter video signal is output (factory-
setting).
RET: Return video signal is output.
e MB-1019 board
A S1 switch
B S2 switch
S301
S302
Audio to be output
A S301 switch
B S302 switch