Cable-Tronix CTADM-806a Installation Manual - Page 3

Browse online or download pdf Installation Manual for Modulator Cable-Tronix CTADM-806a. Cable-Tronix CTADM-806a 6 pages. Rack mount agile audio/video demodulator

Print Page

CTADM-806a

Rack Mount Agile Audio/Video Demodulator Specifications (Typical)

1. Bandwidth

2. Channels

3. Input Level

4. Image rejection

5. Noise figure

VIDEO

1. Video Output Level

2. Video Impedance

3. Differential Gain

4. Differential Phase

5. Bandwidth

6. Frequency Response

7. Detector Type

AUDIO

1. Output Level

2. Output Impedance

3. Frequency Response

4. Detection Type

5. MPX Output Level

GENERAL

1. Power Input

2. Operating Temperature

3. Connectors

MECHANICAL

1. Dimensions

2. Weight

INSTALLATION AND OPERATION

System installer must adhere to Article 820-40 of the NEC that

provides guidelines for proper grounding and specifies that the

cable ground shall be connected to the grounding system of the

building, as close to the point of cable entry as practical.

SPECIFICATIONS

54 – 806 MHz

VHF 2 -13, UHF 14 – 69

CATV 2 – 125 HRC/IRC offsets

Single channel, +40 dBmV maximum

60 channels, +20dBmV maximum

@ -47dbm input VHF=70dB, UHF=60dB

@ -17dbm input VHF=60dB, UHF=50dB

VHF= 8dB, UHF=8dB

0.5 to 1 Vp-p

75 Ohms

<5% max. @ 10 to 90% APL

<5° max. @ 10 to 90% APL

DC to 4.2 MHz

+/- 1.5dB

Envelope

800 mV (minimum) de-emphasized

600 ohms

20 Hz to 15 KHz

Quadrature FM

800mV unbalanced @600 ohms

105 – 130VAC, 60 Hz

32 ˚F ~ 122 ˚F

RF In, Video Out, IF Out: "F" Type

MPX Out, Audio Out: RCA Type

19"(W)" x 1.75 (H) x 3" (D)

4.16 Lbs.

NOTE TO SYSTEM INSTALLER