Cisco TelePresence System Codec C40 Getting Started Manual - Page 18
Browse online or download pdf Getting Started Manual for Conference System Cisco TelePresence System Codec C40. Cisco TelePresence System Codec C40 42 pages. Telepresence c series
telepresence mx series
telepresence sx series
telepresence ex series
Also for Cisco TelePresence System Codec C40: User Manual (44 pages), Troubleshooting Manual (37 pages), User Manual (48 pages), Getting Started Manual (46 pages)
Print Page
Cisco TelePresence Systems
GettinG started Guide
Table of contents
Introduction
remote control and on-screen menu
Setting the Administrator Settings menu
password
When starting up the system for the first time the
Administrator Settings menu password is not set.
NoTE: We strongly recommend that you define a password
to protect the Administrator Settings menu, since these
settings affect the behavior of the video conference system.
1. Go to
Home > Settings > Administrator settings > Set
menu
password.
On the remote control, press the # key to toggle
between lower or upper case characters and numbers:
abc/ABC/123.
2. Enter the menu password. The password you enter is
hidden; each character is replaced with a star (*).
3. Select
Save
to save the changes, or
without saving.
4. Press
Home
(
)
to exit.
Back to task overview
D14639.06 Video Systems Getting Started Guide (TC5.1) | 2012 FEBRUARY | © 2011-2012 Cisco Systems, Inc. All rights reserved.
User interfaces
Cancel
to leave
Configuration
Configuration
Appendices
18
www.cisco.com