Cisco TelePresence System Codec C40 Getting Started Manual - Page 23
Browse online or download pdf Getting Started Manual for Conference System Cisco TelePresence System Codec C40. Cisco TelePresence System Codec C40 42 pages. Telepresence c series
telepresence mx series
telepresence sx series
telepresence ex series
Also for Cisco TelePresence System Codec C40: User Manual (44 pages), Troubleshooting Manual (37 pages), User Manual (48 pages), Getting Started Manual (46 pages)
Print Page
Cisco TelePresence Systems
GettinG started Guide
Table of contents
Introduction
Web interface
Configuration using the web interface
You have to use the Touch controller or remote control for
the configurations until you know your system's IP address.
Finding the IP address
Tap
More > Settings > System Information
controller; or navigate to
Home > Settings > System
information
if you use the remote control and on-screen
menu.
In both cases you will find the IPv4 Address and/or IPv6
Address of the system in the NETWORK section.
Signing in to the web interface
1. Open a web browser and enter the system's IP address
in the address bar.
2. Enter your user name and password and click
The default user name is
admin
with no password set.
If you are not able to connect to the system:
• Make sure the system and computer are connected to
the same network.
• Make sure the system is switched on.
If the system has just been switched on, wait a few minutes
to allow the system to start up.
Back to task overview
D14639.06 Video Systems Getting Started Guide (TC5.1) | 2012 FEBRUARY | © 2011-2012 Cisco Systems, Inc. All rights reserved.
User interfaces
on a Touch
Sign
In.
Configuration
Configuration
Appendices
The web interface
23
www.cisco.com