Accessing the system using the web interface
This guide deals mainly with management of the system using the web interface.
To access the web interface you must first identify the ip address of the system. The different methods
to find the ip address are shown in the Find IP address sections below.
When you have obtained the ip address, open a web browser and enter the system's ip address in the
address bar. Enter your user name and password in the corresponding fields on the sign in page and
click Sign In. The default user name is admin with no password set.
Figure 1 - Web Page Administration Sign In
To effectively manage the system you need to login as admin. please see "Security" on page 21 for
more details on default passwords and information on how to secure your system.
Find IP address – Touch interface
if you have a Touch panel, press the system settings icon in the upper right corner of the screen
(Figure 2). This opens the System information and you can find your system's ip address under
the
System Information -> NETWORK heading
Figure 2 - Settings Icon on Touch Screen
Figure 3 - System IP address - Touch Interface
D15029.01 Troubleshooting Guide TC6.0, April 2013.
(Figure 3).
Find IP address – remote control
Follow the steps below to get the ip address from the system.
•
press the Home button
•
When you see menu choose
•
Then select
System Information
•
You will now see the ip address under Network (Figure 4)
Figure 4 – IP Address shown under System Information
Tip
There is a shortcut on the remote control to open the System information:
•
press the home button so that you see the menu
•
Then press the fifth soft key at the top of the remote to open the System information and get
the ip address (Figure 5)
•
Another shortcut from the System information screen is to press the fourth soft key to access
the System configuration menus
Figure 5 – Soft Key Shortcut to System Information
5
Troubleshooting Guide TC6.0
Settings
Copyright © 2013 Cisco Systems, Inc. All rights reserved.
Print Page