Cisco UNIFIED COMMUNICATIONS UC320W Quick Start Manual - Page 2
Browse online or download pdf Quick Start Manual for Conference System Cisco UNIFIED COMMUNICATIONS UC320W. Cisco UNIFIED COMMUNICATIONS UC320W 6 pages.
Also for Cisco UNIFIED COMMUNICATIONS UC320W: Quick Start Manual (4 pages), Pre-Installation Site Information (29 pages)
Print Page
Welcome
Thank you for choosing the Cisco Small Business Unified Communications
Model UC320W. This guide describes how to install the equipment and
get started configuring the system.
Before You Begin
1
Minimum Requirements
• PC with web browser and Adobe Flash Player version 10. 1 or later.
• Cisco SPA300 Series or Cisco SPA500 Series IP phones.
• Power adapters for the phones, as needed. Cisco SPA300 Series
phones always require power adapters. Cisco SPA500 Series phones
can receive power from a Power over Ethernet switch.
• Ethernet cables to connect IP phones and computers.
• Internet service.
• Voice over IP service or analog phone service.
Default Settings
Parameter
Username
Password
LAN IP
(Also the address for the web-
based configuration utility.)
DHCP Range
(DHCP server is enabled by default.)
Netmask
Voice VLAN
Default Voice VLAN Subnet
Be sure to update to the latest firmware when asked at the
N
OTE
beginning of the installation.
Before installing the Cisco UC320W into an existing network
C
AUTION
with another DHCP server, refer to the Smart Designs (see links on
page
7). Carefully follow the instructions in this guide and in the UC320W
Simple Configuration Utility. IP address conflicts will result if two DHCP
servers are installed on your network.
2
VoIPon www.voipon.co.uk [email protected] Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
Default Value
cisco
cisco
192. 1 68. 1 0. 1
192. 1 68. 1 0. 1 00 to 149
255.255.255.0
100
10. 1 . 1 . 1
Cisco UC320W Quick Start Guide