Argo Misse13DCI Operating Instruction - Page 4

Browse online or download pdf Operating Instruction for Air Conditioner Argo Misse13DCI. Argo Misse13DCI 15 pages. Room air conditioner with remote condenser

Print Page

PRODUCT IDENTIFICATION

01. Infrared rays remote control unit

02. Monitor panel

03. Supply air deflector

4. Return air grille

5. Outdoor unit

06. Flexible tube

07. Air filter

08. Electric cable with plug

09. Service tube for condensate evacuation

10. Outdoor unit basket or support

11. Quick coupling cover

MONITOR PANEL

1. TIMER lamp: This lamp lights up when the system is

being controlled by the timer.

2. OPERATION lamp: This lamp lights up during operation.It

blinks once to announce that the remote control signal

has been received and stored.

WATER-LEVEL ALARM

This lamp flashes and the air conditioner simultaneously

stops during exceeding condensate drainage or because

of malfunctioning of the condensate drainage system.

3. STANDBY lamp: this lamp lights up when the air

conditioner is connected to the power and ready to receive

the remote control command.

4. Receiver : receives signals transmitted from the remote

control.

5. Operation button (without remote control): Push the

button to walk through the OFF and COOL operation

modes.

WARNING

The OFF position does not disconnect the power. Use the

main power switch to turn off power completely.

NOTE

The fixed OPERATION lamp and the blinking of TIMER and

STANDBY lamps, indicates that the operating mode selected

(

) is not compatible with the unit. If this happen the air

conditioner does not operate until the correct mode is

selected.