Argo ORION PLUS Operating Instructions Manual - Page 13
Browse online or download pdf Operating Instructions Manual for Air Conditioner Argo ORION PLUS. Argo ORION PLUS 16 pages. Portable air conditioner (local)
Also for Argo ORION PLUS: Operating Instructions Manual (18 pages)
Print Page
(5) MODE SELECTION BUTTON (MODE)
Press this button to select the various operating modes, according to the following sequence:
In the COOL mode the display lights up. In the DRY and FAN modes the display does not light up.
(6) SLEEP BUTTON
Press this button to activate the Sleep function, which automatically adapts the temperature to changes in body and
room temperature throughout the night, so as to optimise comfort when sleeping and minimise consumption.
In cooling mode, the temperature increases by 1 °C in an hour then by 2 °C in two hours, and remains in this setting for
the whole period. The Sleep function is not available in the ventilation, dehumidification and auto modes. The indicator
light turns on whenever the Sleep function is set.
In sleep mode there is no variation of the ventilation speed.
In cooling, after the first hour the set temperature increases by 1 ° C, after the second hour it increases
still 1 ° C; after the 5th hour it decreases by 1C °, continues in this way for another 3 hours now and then exits the
function Sleep while continuing to work normally in cold.
In the heating, the reverse happens. After the first hour the temperature decreases by 1 ° C, after the second hour
decreases again by 1 ° C; after the fifth hour it increases by 1 ° C, continues in this way for another 3 hours then exits
from Sleep function while continuing to operate normally in hot conditions.
(7) "TIMER" BUTTON
a. When the air conditioner is turned off, press "TIMER" to set a time to turn on the air conditioner. Press "+" or "-" to set
the time, and press "TIMER" again to confirm it.
b. When the air conditioner is turned on, press "TIMER" to set a time to turn off the air conditioner. Press "+" or "-" to set
the time, and press "TIMER" again to confirm it.
c. After setting the time, press "TIMER" again to cancel the set time.
Note: After setting the time, press "TIMER" again to confirm it in 5 seconds. Without any operation in 5 seconds, the air
conditioner will confirm the time automatically. Press "TIMER" after confirming the time will cancel the set time.
(8) "SWING" BUTTON
Press "SWING" top turn on or off the swing function.
TEMPERATURE AND ERROR DISPLAY
Problem
P1
Tank full of water.
The temperature and error display lights up only in the COOL mode. In the DRY and FAN modes the display does not light
up.
WARNING!
Prior to carrying out any cleaning or maintenance, unplug the unit from the power socket.
V 01/21
Cause
CARE AND MAINTENANCE
Empty the tank.
If the problem persists, contact a service centre.
Solution
29